Description
The SilencerCo ASR Flash Hider (AC141) is a 1/2x28 muzzle device in .223/5.56 caliber with a nitride finish. Its primary job is twofold: reduce muzzle flash to protect your vision in low-light conditions, and serve as the host attachment point for SilencerCo's ASR suppressor mount system.
The ASR system is a one-hand-on, one-hand-off quick-attach interface. Once this flash hider is torqued down, you can run any ASR-compatible suppressor on or off without tools. Confirmed compatible suppressors include the Specwar, Saker, Hybrid, Omega, and Harvester.
The design eliminates the tuning-fork effect common in prong-style flash hiders, and the retention geometry is built to stay put under sustained fire. The package includes a shim set and Rocksett, so you have what you need to get the timing right at installation without a separate parts order.
- Thread pitch: 1/2x28
- Caliber: .223 / 5.56mm
- Finish: Nitride, black
- No tuning-fork effect
- Will not walk loose under heavy firing
- Includes shim set and Rocksett
- ASR mount compatible: Specwar, Saker, Hybrid, Omega, Harvester
Does this work with suppressors outside the listed models?
It works with any SilencerCo suppressor that uses the ASR mount interface. Verify mount compatibility directly with SilencerCo if your suppressor is not on the confirmed list above.
Is Rocksett required for installation?
Rocksett is the recommended thread-locking compound for muzzle devices because it withstands heat and releases with a heat gun when removal is needed. It is included in the box.
