Description
This 2-foot extension cable is built for one job: running an antenna off your plate carrier cleanly, with a quick-disconnect at the radio. It relocates your antenna from the radio to a mount on your kit, so the antenna rides high and in the clear for signal while the radio tucks away wherever it's convenient. The two things that make this cable work for a serious setup are the right-angle plugs on both ends and the BNC quick-disconnect, and both are deliberate.
The right-angle plugs are what separate this from a generic extension. A straight plug sticks out from your radio and your antenna mount, snags on gear, and forces the cable into a hard bend right at the connector. Right angles let the cable lie flat against the carrier and route cleanly along your kit, which is the difference between a wire-managed setup and a mess of cable catching on everything. If you've tried to run an antenna cable on a plate carrier with straight connectors, you already know why this matters.
The BNC end gives you a quarter-turn quick-disconnect at the radio instead of threading a connector on and off every time. When you need to ditch the radio, swap it, or break down your kit, you twist and it's off, no spinning a threaded connector in a hurry. The other end is a standard SMA male plug that a regular antenna threads straight onto.
Read this before you order: both ends of this cable are right-angle male plugs, BNC on one end, SMA on the other. The SMA end connects straight to a standard antenna. The BNC end needs an adapter to connect to your radio's SMA jack, you'll want the SMA-Female to BNC-Female adapter to mate the cable's BNC plug to a Baofeng-style radio (like a UV-5R). Add that adapter to your order so you're ready to run the moment it arrives. Browse the rest of our radios and comms gear here.
How It Connects
The full chain, radio to antenna: your radio's SMA jack → SMA-Female to BNC-Female adapter → this cable's BNC quick-disconnect end → 2ft of cable routed along your carrier → this cable's SMA end → your antenna. The adapter is the one extra piece you need; the antenna threads straight on.
What It's For
- Plate carrier antenna mounts. Run the antenna off your kit, not off the radio.
- Clean wire management. Right-angle plugs keep the cable flat and snag-free.
- Fast radio changes. BNC quick-disconnect lets you drop the radio in a quarter turn.
- Better signal placement. Get the antenna up high and off your body.
Specs
- Length: 2 ft
- Radio end: Right-angle BNC male (quick-disconnect)
- Antenna end: Right-angle SMA male
- Required adapter: SMA-Female to BNC-Female (sold separately) to connect to an SMA-jack radio
- Antenna: Standard SMA antenna threads directly onto the SMA end
- Best for: Plate carrier and chest rig antenna relocation
FAQ
What do I need to use this with my radio?
You need the SMA-Female to BNC-Female adapter to connect the cable's BNC end to your radio's SMA jack. The SMA end of the cable connects straight to a standard antenna with no adapter. Add the adapter to your order if you don't already have one.
Why both right-angle plugs?
Wire management. Straight plugs stick out and snag, and they bend the cable hard right at the connector. Right angles let the cable lie flat against your plate carrier and route cleanly, which is what you want for a kit you'll actually wear and move in.
Why a BNC connector at the radio?
BNC is a quarter-turn quick-disconnect, so you can pull the radio off fast without unscrewing a threaded connector. It's the right choice when you need to break down or swap gear quickly.
What antenna works with it?
Any standard SMA antenna threads directly onto the cable's SMA male end. Mount the antenna on your plate carrier and run the cable to your radio.
Does the right-angle or extension hurt signal?
Minimal loss, and it's far outweighed by getting the antenna off your body and up into a better position. The whole point is cleaner placement and a tidier kit.
